تأثير نسب الخلط والمعالجة بالتنعيم على الخواص الفيزيقية لأقمشة الهنيکوم السليلوزية المستخدمة فى ملابس السيدات "Effect of Mixing Ratios and Softening Processing on the Physical Properties of Honey Comb Cellulosic Fabrics Used in Ladies Clothing"

نوع المستند : أبحاث علمیة

المؤلف

قسم الإقتصادالمنزلي کلية التربية النوعية – جامعة طنطا

المستخلص

ملخص البحث :
تستخدم مواد التطرية في أقمشة الملابس لتحسين خواص تلک الأقمشة ومنها نعومة الملمس وتعويض مواد التطرية الطبيعية مثل الزيوت والشموع والمواد الدهنية والتى أزيل معظمها أثناء عمليات التحضير، وتعتبر الألياف السليلوزية أکثر الألياف النسجية استهلاکاً، وتحظى حالياً خواص الأقمشة بعناية مکثفة لدى الباحثين والعاملين فى مجال تطوير وتحسين الأقمشة وذلک للإيفاء بمتطلبات الاستخدام النهائى وکذلک لتحقيق عنصر المنافسة مع الأسواق العالمية ، وعلى ذلک فقد إهتم هذا البحث بدراسة الخواص الفيزيقية لأقمشة الهنيکوم السليلوزية و ذلک بعد معالجتها بالتنعيم وباستخدام نسب خلط مختلفة لخيط اللحمة .
* تم إنتاج الأقمشة السليلوزية المستخدمة بالبحث وذلک بالمواصفات التالية :
* نوع خيط اللحمة :
-کتان 100% نمرة 24/2
- قطن100% نمرة 12/1 غزل ذو الطرف المفتوح .
*حيث تم استخدام نسب خلط مختلفة لخيط اللحمة کالآتي :
1-100% قطن 2-75% قطن : 25% کتان 3-50% قطن : 50% کتان 4-25% قطن : 75% کتان 5-100% کتان
*وتم استخدام نوع واحد من الخامات لخيط السداء وهو : قطن 100% نمرة 24/1 غزل حلقي .
* وکان الترکيب النسجي المستخدم هنيکوم( خلايا النحل ) .
*تم معالجة الأقمشـة المنتجة تحت البحث باستخدام ثلاثة أنواع من المنعمات
( ليومين NI ، جي بي سيليکون ، سيدکوسوفت PE400 )
- بعد ذلک تم إجراء الإختبارات المعملية وذلک لتحديد أنسب نسبة خلط لخيط اللحمة وأنسب مادة تنعيم لتحسين الخواص الوظيفية للأقمشة السليلوزية .
*بعد الحصول على نتائج هذه الإختبارات تم تطبيق الأسلوب الإحصائي المناسب وتقييم الجودة الکلية لهذه النتائج وقد توصلت الدراسة الى النتائج التالية :
1- الأقمشة غير المعالجة بمادة تنعيم والمنتجة بنسبة خلط لخيط اللحمة
(100% کتان) هى الأفضل بالنسبة للخواص الوظيفية المقاسة وذلک بمساحة مثالية 597.29 .
2- الأقمشة المعالجة بمادة تنعيم سيدکوسوفت PE400 والمنتجة بنسبة خلط لخيط اللحمة (50% قطن: 50% کتـان) هي الأقل بالنسبة للخواص الوظيفية المقاسة ، وذلک بمساحة مثالية 443.57 .
"Effect of Mixing Ratios and Softening Processing on the Physical Properties of Honey Comb Cellulosic Fabrics Used in Ladies Clothing"
By
Dr. Assmaa Samy Abd-Elaty Swelam
Lecturers: Clothes and Textiles,
Home Economics Department,
Faculty of Specific Education, Tanta University
Abstract
Softeners are used in clothing fabrics to improve the properties of these fabrics such as smoothness, and to compensate the natural softening material like :oils , waxes and fatty substances , which removed most of them during the preparations ,cellulosic fibers are more fiber textile consumption , and are currently the properties of fabrics carefully intense among researchers and practitioners in the field of development and improvement fabrics in order to fulfill the requirements of the end use , as well as to achieve an element of competition with global markets .
Therefore this research has been interested in studying the physical properties of Honey comb cellulosic fabrics after softening processing using different mixing ratios of weft.
Study procedure included:
*The production of cellulosic fabrics for research according to following specifications:
*Type of the weft:
-100% linen. No.: 24 / 2
-100% cotton open end spinning No.: 12 / 1.
*Where wefts of different mixed ratios are used as follows:
1- 100% cotton. 2- 75% cotton & 25% linen.
3- 50% cotton & 50% linen. 4- 25% cotton & 75% linen.
5- 100% linen.
*Type of the warp:
Using one type of raw materials: 100% ring spinning cotton No.: 24 /1
* Honey comb weave.
* Were treated fabrics produced under the search using three types of softeners (Leomin NI, GB Silicon, and Sydeco soft PE400).
- After it has been conducting laboratory tests in order to determine the most appropriate mixing ratio of weft and soften the most suitable material to improve the functional properties of cellulosic fabrics.
* After getting the results of these tests have been applied appropriate statistical method and evaluate the overall quality of the results of this study has come to the following conclusions :
1 - Untreated fabrics produced by mixing weft (100 % linen) are the best for the functional properties of the measured and the area is ideal 597.29.
2 - Fabrics treated with Sydeco soft PE400 produced by mixing weft (50 % cotton, 50% linen) are the least for the functional properties of the measured, and that area is ideal 443.57
 

الموضوعات الرئيسية